Transducer Block Parameters - Honeywell XNX Technical Manual

Transducer Block Parameters

Index Parameter Mnemonic
1
2 TAG_DESC
3 STRATEGY
4 ALERT_KEY
5 MODE_BLK
6 BLOCK_ERR
7 UPDATE_EVT
8 BLOCK_ALM
TRANSDUCER_
9
TRANSDUCER_
10
11
12 COLLECTION_DIRECTORY
13
14 DATE_FORMAT
15
16
17 SENSOR_TYPE
18
19
20
21 SEN_SN
22
XNX Foundation Fieldbus Technical Manual
ST_REV
DIRECTORY
TYPE
XD_ERROR
PRIMARY_
VALUE
STR_DEVICE_
DATE_TIME
TIME_DATE_
STAMP
GAS_NAME
UNIT_STRING
SEN_SW_VER
ZEN_SN
Description
The revision level of the static data
associated with this block
Can be used to identify grouping
of blocks
User information
User identification number
Contains the modes available to
the block
Contains error status
This is generated when the static
data in the block is changed
Identifies that a problem exists in
the system
Specifies the number and starting
indices in the transducer block
Transducer Type identification
Additional error codes
Specifies the number, starting indices,
and DD item identifications
The measured value
Classification of a day as a
specific calendar date is the
format used to express that date
Date and Time on the device
Date and Time Stamp on the
device status
Connected Sensor Type
identification
Sensor Gas Name Identification
Sensor Gas Measuring Unit
Identification
Connected Sensor Software
Version
Connected Sensor Serial Number
Device Serial Number
27