Visioneer PATRIOT P15 User Manual page 24

®
V P P15
ISIONEER ATRIOT
3. Turn on the scanner power.
The status light comes on and flashes indicating that the scanner is receiving power.
Your computer recognizes that a scanner has been plugged into the USB port and automatically loads the
appropriate software to run the scanner.
4. When you're certain that the software has completely loaded, return to the "Complete the installation by
connecting your hardware" window.
Click OK to complete the installation process.
5.
24
I
NSTALLATION
S U ' G
CANNER SER S UIDE