Yamaha aventage RX-A3070 Owner's Manual page 140

Menu
Delay Enable
Lipsync Auto/Manual Select
Adjustment
Dynamic Range
Max Volume
Initial Volume
Pure Direct Mode
Sound
Adaptive DSP Level
CINEMA DSP 3D Mode
Virtual Presence Speaker
Virtual Surround Back Speaker
DAC Digital Filter
(RX-A3070 only)
Object Decode Mode
Video Video Mode
HDMI Control
HDMI Audio Output
Standby Through
Network Connection
IP Address
Network Standby
Network
MAC Address Filter
Network Name
MusicCast Link Power Interlock
Bluetooth
Disconnect
Audio Receive
Bluetooth Bluetooth Standby
Transmitter
Audio Send
Device Search
Item
Enables/disables the Lipsync adjustment for each input source.
Selects the method to adjust the delay between video and audio output.
Adjusts the delay between video and audio output manually.
Selects the dynamic range adjustment method for bitstream audio (Dolby Digital and DTS signals) playback.
Sets the limit value of the volumes.
Sets the initial volume for when this receiver is turned on.
Selects whether to output video signals during the Pure Direct mode.
Selects whether to automatically adjust the CINEMA DSP effect level.
Enables/disables CINEMA DSP HD
Selects whether to create Virtual Presence Speaker (VPS) using the front, center, and surround speakers.
Selects whether to create Virtual Surround Back Speaker (VSBS) using the surround speakers.
Selects the digital filter type of the audio DAC (digital-to-analog converter).
Enables/disables playback of object-based audio signals such as Dolby Atmos or DTS:X contents.
Enables/disables the video signal processing (resolution, aspect ratio and video adjustments).
Enables/disables HDMI Control. You can also configure the relevant settings (such as ARC and TV audio input).
Selects a device to output audio.
Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode.
Selects the network connection method.
Configures the network parameters (such as IP address).
Selects whether to enable/disable the function that turns on the unit from other network devices.
Sets the MAC address filter to limit access to the unit from other network devices.
Edits the network name (the unit's name on the network) displayed on other network devices.
Selects whether turning on the power of the master device of the MusicCast network (the unit) also turns on the power of
other devices of the network.
Enables/disables the Bluetooth functions.
Terminates the Bluetooth connection between the Bluetooth device (such as smartphones) and the unit.
Selects whether to enable/disable the function that turns on the unit from Bluetooth devices (Bluetooth standby).
Enables/disables the Bluetooth audio transmitter function.
Searches available Bluetooth devices (speakers/headphones) when the unit is used as a Bluetooth audio transmitter.
Function
3
.
140
En
Page
147
147
147
147
148
148
148
148
148
148
148
149
149
149
151
152
152
152
152
153
153
154
154
154
97
154
155
98