Input Menu Items - Yamaha aventage RX-A3070 Owner's Manual

Input menu items

X
• Available items vary depending on the selected input source.
• Default settings are underlined.
Item
Rename/Icon Select Changes the input source name and icon.
Decoder Mode Sets the format of digital audio playback to DTS.
Volume Interlock Enables/disables volume controls from iTunes/iPod via AirPlay.
Selects whether to allow a DLNA-compatible Digital Media
DMC Control
Controller (DMC) to control playback.
(RX-A3070 only)
Balance Input Attenuator
Selects whether to activate the attenuator for the balance input to
avoid sound distortion.
(RX-A3070 only)
Ultra Low Jitter PLL Mode
Enables/disables the jitter elimination function.
■ Rename/Icon Select
Changes the input source name and icon displayed on the front display or TV screen.
X
Some network input sources (such as "AirPlay") cannot be renamed or have the icons changed.
■ Setup procedure
1
Use the cursor keys (e/r) to select "Auto" or "Manual" and press the cursor key (w).
If you select "Auto", the unit creates a name automatically according to the connected device. In
this case, skip Steps 3 and 4.
X
This step is available only when "AV1-7", "VIDEO AUX" or "AUDIO1-3" (available only when any audio digital
input jack is assigned) is selected.
2
Use the cursor keys (e/r) to select an icon and press the cursor key (w).
3
Press ENTER to enter the name edit screen.
Function Page
130
131
131
131
131
131
En
4
Use the cursor keys and ENTER to rename and select "ENTER" to confirm the entry.
X
To clear the entry, select "CLEAR".
5
Use the cursor keys to select "OK" and press ENTER.
X
To restore the default setting, select "RESET".
6
To exit from the menu, press ON SCREEN.
130