Yamaha aventage RX-A3070 Owner's Manual page 114

■ Connecting an HDMI-compatible device to play back
videos/audio
Connect an HDMI-compatible device (such as a TV) to play back videos/audio at Zone2 or
Zone4. If you connect an AV amplifier, you can enjoy multichannel playback in another room
(Zone4).
Y
• To watch videos played back on a video device at Zone2 or Zone4, you need to connect the video device to the
unit with an HDMI cable (p.44).
• We recommend that you disable HDMI Control on the playback devices connected to the unit.
• On-screen menu operations are not available for Zone2 and Zone4.
HDMI OUT 2
The unit (rear) (ZONE OUT) jack
HDMI OUT
(HDCP2.2)
2
HDMI (HDCP
HDMI OUT
(HDCP2.2)
(ZONE OUT)
AV 1 AV 2 AV 3 AV
2 1
(ZONE OUT) ARC (1 BD/DVD) HDMI
AV 1 AV 2 AV 3 AV 4 COMPONENT VIDEO
(1 BD/DVD) AV 1 P P
Y B R
A
VIDEO
B
P P
Y AV 2 B R
1 AUDIO 2 AUDIO 3
) ZONE OUT/PRE OUT PRE OUT
L (SINGLE)
R
ZONE 2/ ZONE 3/
FRONT SURROUND SUR. BACK
CAL 2 OPTICAL 3 COAXIAL 4 COAXIAL 5 COAXIAL 6 OPTICAL F.PRESENCE R.PRESENCE
R SURROUND L R
SURROU
AUDIO 4 ANTENNA
L (4 RADIO)
FM AM
75
Main zone
To assign the HDMI OUT 2 (ZONE OUT) jack to Zone2 or Zone4, set "HDMI OUT2 Assign" (p.157)
in the "Setup" menu to "Zone2" or "Zone4".
(Example: using a TV)
HDMI input
HDMI
HDMI
Zone2 or Zone4
(Example: using an AV amplifier)
HDMI input
HDMI
HDMI
Zone4
X
• When the HDMI OUT 2 (ZONE OUT) jack is assigned to Zone2, you can enable/disable the audio output from the
HDMI OUT 2 jack by setting "Zone2 - Audio Output" (p.157) in the "Setup" menu to "On" or "Off" (default).
• You can also use speakers placed in Zone2 to output audio (p.39).
• Videos/audio interruptions may happen in another zone when any of the following operations is
performed.
– Tuning on/off a TV connected to the unit via HDMI or switching the TV input
– Enabling/disabling a zone output or selecting its input source
– Changing the sound mode or audio settings
114
En