Huawei AP7050DE Hardware Installation And Maintenance Manual page 28

AP7050DE
Hardware Installation and Maintenance Guide
Before logging in to the device, complete the following tasks:
l
l
l
If your PC's operating system provides terminal simulation software (like HyperTerminal in Windows 2000/
XP), you do not need to install additional terminal simulation software. If the PC runs on an operating system
without terminal simulation software (like Windows 7), install third-party terminal simulation software on the
PC by referring to the user manual or online help.
Step 1 Use a console cable to connect the PC to the console port of the device.
Step 2 Start terminal emulation software on the PC, create a connection, and set communication
parameters as follows:
l
l
l
l
l
Step 3 Press Enter and enter the default user name admin and password admin@huawei.com as
prompted to log in to the user view. (The following information is only for reference.)
Login authentication
Username:
Password:
Info: You are advised to change the password to ensure security.
You are advised to change the default user name and password on your first login.
----End
Issue 01 (2016-04-15)
Power on the device.
Prepare a console cable.
Prepare terminal simulation software.
NOTE
Bits per second: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow control (F): None
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Logging In to the Device
22