Installing The Device On A Ceiling - Huawei AP7050DE Hardware Installation And Maintenance Manual

AP7050DE
Hardware Installation and Maintenance Guide
3.
4.
5.

2.5.2 Installing the Device on a Ceiling

1.
Issue 01 (2016-04-15)
Fix the mounting bracket to the wall and use the Phillips screwdriver to fasten three
expansion screws into the expansion tubes.
Connect the cables. For details, see
Align the mounting screws at the rear of the AP with the mounting holes on the sheet
metal mounting bracket and then press the AP downwards to secure the AP on the
bracket.
Remove a ceiling tile, determine locations of mounting holes based on the distance
between two installation holes on the mounting bracket, use a hammer drill to drill holes
on the ceiling tile, and fix the mounting bracket to the ceiling tile.
The screws provided for ceiling-mounting of APs are 30 mm long and can be used to fix
an AP on a ceiling not thicker than 15 mm. To install APs on thicker ceilings, you need
to purchase longer screws.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2.6 Cable Connection.
a
b
2 AP Installation
13