Huawei AP7050DE Hardware Installation And Maintenance Manual page 59

AP7050DE
Hardware Installation and Maintenance Guide
l
Issue 01 (2016-04-15)
Figure 5-44 Installing two terminals back to back
NOTICE
Ensure that the OT terminal is not in contact with other terminals or metal
components.
c. Move the cable slightly and ensure that it is securely connected, as shown in
5-45.
Figure 5-45 Installed OT terminal
Install two OT terminals on a post.
Before you install two OT terminals on a post, ensure that the two terminals can be
installed on the post and that the electrical connecting pieces have a large contact area.
Two OT terminals can be installed using any of these methods:
– Bend the upper OT terminal at a 45- or 90-degree angle, as shown in
– Cross the two terminals, as shown in
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Figure 5-47.
5 Appendix
Figure
Figure 5-46.
53