Mywirelesstv 3 Receiver - ActionTec MWTV3TX User Manual

firmware update is available. See "错误！未找到引用源。" for more details.
Power port. The 5V DC / 2A power portisused to connect the Transmitter to a power

source.
HDMI Input port. The HDMI Input port is used, via an HDMI cable, to connect the

Transmitter toan HDMI source (set top box, Blu-ray player, gaming console, etc.).
HDMI Out to TVport. The HDMI Out to TV port(a pass-through port) is used, via an

HDMI cable, toconnect the Transmitter to a local HDTV to allow continued videoviewing
on the monitor located nearest to the Transmitter. Connection to this port is optional.
IR Transmit port. The IR Transmit port is used to connect the IR Blaster cable to the

Transmitter,enabling the use of the source device remote control in tandem
withMyWirelessTV.

1.3.2. MyWirelessTV 3 Receiver

The MyWirelessTV 3Receiver features four ports (Power, HDMI Out to TV,IR Ext, and
USB), two buttons (MENU and SELECT), and three LEDs (MODE, LINK, and POWER).
Draft
3