Set Up Drives; Overview - Siemens SINUMERIK 840D sl Operating Manual

Managing programs

14.12 Set up drives

References
A detailed description of the configuration can be found in the following documentation:
SINUMERIK Operate Commissioning Manual
Procedure
14.12 Set up drives
14.12.1

Overview

Up to 21 connections to so-called logical drives (data carriers) can be configured. These drives
can be accessed in the "Program manager" and "Startup" operating areas.
The following logical drives can be set up:
● USB interface
● Network drives
● CompactFlash card
● CompactFlash card of the NCU, only for SINUMERIK Operate in the NCU (for 840D sl)
● Local hard disk of the PCU, only for SINUMERIK Operate on the PCU (for 840D sl)
704
1. Select the program manager.
2. Choose the desired storage location and position the cursor on the file or
directory whose properties you want to display or change.
3. Press the ">>" and "Properties" softkeys.
The "Properties from ..." window appears.
4. Enter any necessary changes.
Note: You can save changes via the user interface in the NC memory.
5. Press the "OK" softkey to save the changes.
Operating Manual, 05/2017, A5E40868956
Milling