Parameters For Block Search In The Search Pointer - Siemens SINUMERIK 840D sl Operating Manual

Milling
Hide thumbs Also See for SINUMERIK 840D sl:
Table of Contents

Advertisement

Machining the workpiece
6.7 Starting machining at a specific point
Procedure
Note
Interruption point
You can load the interruption point in search pointer mode.
6.7.6

Parameters for block search in the search pointer

Parameter
Number of program level
Program:
Ext:
P:
Line:
Type
Search target
170
1.
Press the "Block search" softkey.
2.
Press the "Search pointer" softkey.
3.
Enter the full path of the program as well as the subprograms, if required,
in the input fields.
4.
Press the "Start search" softkey.
The search starts. Your specified search mode will be taken into account.
The Search window closes. The current block will be displayed in the
"Program" window as soon as the target is found.
5.
Press the <CYCLE START> key twice.
Processing is continued from the defined location.
Meaning
The name of the main program is automatically entered
File extension
Number of subprogram repetitions
If a subprogram is performed several times, you can enter the number of the
pass here at which processing is to be continued
Is automatically filled for an interruption point
" " search target is ignored on this level
N no. Block number
Label Jump label
Text string
Subprg. Subprogram call
Line Line number
Point in the program at which machining is to start
Operating Manual, 05/2017, A5E40868956
Milling

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 840de slSinumerik 828d

Table of Contents