Hasselblad 503CW Instruction Manual page 8

EI
'CI
Attaehing the Magazine
Ensure that the magazine slide is fully inserted
with the hinge towards the front of the camera
(see detail on page 9) and that the magazine status
indicator is white. If the indicator is red then fol-
low the instructions on the page 5. It is also advis-
able to have the camera fully wound.
Rest the magazine on the magazine supports mak-
ing sure that the lugs are properly engaged in the
recesses. Carefully swing the magazine towards
the camera body and check that the camera's
upper support hooks fit into the slots in the maga-
ztne.
Push the magazine gently but firmly against the
hooks while sliding the magazine catch to the
right. Release the button when the magazine has
made contact with the camera body, and then push
the button to the left to ensure that it has reached
the locked position. Remove the slide to positive-
ly lock the magazine to the camera body. The
camera is now ready to use.
Remoulnu
tne ffiagaiine
Just as when attaching the magazine, it is advis-
able to have the camera fully wound and the mag-
azine indicator displaying white.
Getting Started