Hasselblad 503CW Instruction Manual page 25

El
'o
Ghanging the Focusing Hood or Uiewfinder
To remove the focusing hood so as to attach any
other viewfinder in the Hasselblad system, pro-
ceed as follows:
l) Detach the magazine.
2) Fold down the focusing hood to protect it
from damage and remove it by sliding it to
the rear in its guide slots.
3) Slide the replacement viewfinder into the
slots and push it forward until it stops.
When fully inserted the viewfinder is retained
in position by a spring-loaded catch until you
have reattached the masazine.
Changing the Magnifier
Mounted lenses with dioptre correction from +3
to -4 arc available, and are easily interchanged as
follows:
1) Remove the focusing hood from the camera
and open it by lifting the lid.
2) Release the magnifier by pushing the catch to
the right.
3) Push the magnifier halfway back down to its
folded position.
4) Grip the lower edge of the magnifier plate
(through the underside of the hood), and pull
firmly.
5) Keep the plate holder halfway down and insert
the replacement lens plate with the printed side
up. Fold the hood down and replace on the
camera.
The ViewJinder System
21