Hasselblad 503CW Instruction Manual page 11

EI
'o
elosing the Fnmsing Hood
Fold away the magnifier by pressing it back down
towards the lid until it locks into place. 'Pinch'in
the side plates at the hinge points and then push
the lid lightly backwards. The hood then automat-
ically folds back down.
Removing the t{finding erank
Push the catch lever downwards while rotatins the
crank counter-clockwise. Then pull the c"rank
straight out from the shaft.
Attaching tile Winding Crank
Attach the crank to the shaft, aligning the smaller
triangular index mark against the red dot just
above the mount. Keep the crank pushed against
the camera while turning it clockwise until the
larger triangular mark is aligned with the red dot.
:-2
Getting Started