Hasselblad 503CW Instruction Manual page 30

tll
'o
Attachinu the Hasselblad Flash
Adaptors SCA 390 and SGA 590
For hand-held flash units, either adaptor is
attached as shown in the adjacent illustration:
. the 6-pole contact from the spiral cord is con-
nected to the camera's side socket
. the sync cord is connected from the adaptor to
the PC flash terminal of the lens
. the connecting cord is attached to the hand-
held unit
Selling the Film $peed
The film speed is set via the ISO selector. This is
divided into ISO/ASA settings from 16 - 1000
(the equivalent in DIN ratings can be found on
page 27). Certain films require compensation for
differences in reflection. In these instances, the
compensation is made by changing the film speed
selector setting. The amount of compensation has
to be determined by experiment.
26
Flash