Magazine Load Status; Removing Film From The Mag Azine; Film Tab Holder - Hasselblad 503CW Instruction Manual

El
'CI
Magazine Load Status
In the centre of the film holder key there is a cres-
cent-shaped indicator window that shows white
when the magazine is freshly loaded. It gradually
changes to red as the film is wound through. An
all red indicator shows that either the film is used
up or that the magazinc is empty.
Remouing Film from the Magazine
When the last frame has been exposed and wound
on, the magazine blocks the camera for further
release.
Wind off the film by folding out the film winding
crank, and rotate it clockwise until you can feel
the film leaving the supply spool.
You can now withdraw the film holder from the
magazine and remove the exposed film.
The frame counter is automatically reset when the
film holder is withdrawn from the masazine.
F i l m T a b H o l d e r
The end tab of the film pack can be inserted in the
holder on the back of the magazine as a reminder
of the kind of lllm that has been loaded into the
magazlne.
12
MagaTine Operation