Cisco Catalyst 5000 Series Installation And Configuration Note page 25

Catalyst 5509 Configuration
This example shows how to configure the Catalyst 5509:
Cat5509> (enable) set VTP domain Corporate mode server
VTP domain Corporate modified
Cat5509> (enable) set vlan 50
Vlan 50 configuration successful
Cat5509> (enable) set vlan 150
Vlan 150 configuration successful
Cat5509> (enable) set vlan 250
Vlan 250 configuration successful
Cat5509> (enable) set port channel 1/1-2 desirable
Port(s) 1/1-2 channel mode set to desirable.
Cat5509> (enable) set trunk 1/1 desirable isl
Port(s) 1/1 trunk mode set to desirable.
Port(s) 1/1 trunk type set to isl.
Cat5509> (enable) set port duplex 2/1 full
Port 2/1 set to full-duplex.
Cat5509> (enable) set vlan 50 2/1
VLAN 50 modified.
VLAN 1 modified.
VLAN
---- -----------------------
50
Cat5509> (enable) set port duplex 6/1 full
Port 6/1 set to full-duplex.
Cat5509> (enable) set vlan 150 6/1
VLAN 150 modified.
VLAN 1 modified.
VLAN
---- -----------------------
150
Cat5509> (enable)
Catalyst 5505 Configuration
This example shows how to configure the Catalyst 5505:
Cat5505> (enable) set VTP domain Corporate mode client
VTP domain Corporate modified
Cat5509> (enable) set port duplex 3/1 full
Port 3/1 set to full-duplex.
Cat5505> (enable) set vlan 250 3/1
VLAN 250 modified.
VLAN 1 modified.
VLAN
---- -----------------------
250
Cat5505> (enable)
RSFC Configuration
This example shows how to configure the RSFC:
Console> (enable) session 15
Trying Router-15...
Connected to Router-15.
Escape character is '^]'.
RSFC>enable
Mod/Ports
2/1
Mod/Ports
6/1
Mod/Ports
3/1
Catalyst 5000 Series Route Switch Feature Card Installation and Configuration Note
InterVLAN Routing with the RSFC Example
25