Avaya 6402D User Manual page 15

To leave a message without ringing an extension
1. Press
Feature
feature is administered
OR, dial the Leave Word Calling access code.
2. Dial the extension.
Message light goes on at the called telephone (if so equipped).
To cancel a Leave Word Calling message
Note: You cannot cancel a message left for an AUDIX subscriber.
1. Press
Feature
Leave Word Calling Cancel feature is administered
OR, dial the Leave Word Calling cancel code (while off-hook).
2. Dial the extension.
Send All Calls
The Send All Calls feature temporarily sends all your calls to another
extension in the same system.
Note: Before you can use this feature, your system manager must provide a
coverage path for your extension.
To send all calls (except priority calls) immediately to coverage
1. While on-hook, press
Send All Calls feature is administered
OR, dial the Send All Calls access code (while off-hook).
To cancel Send All Calls
1. While on-hook, press
the Send All Calls feature is administered
OR, dial the Send All Calls cancel code (while off-hook).
Whisper Page
The Whisper Page feature allows you, if you have the appropriate
permissions, to make an announcement to a person at another extension
currently on another call. Only the person at the other extension hears the
announcement; the other person on the call cannot hear the message.
Note: The M10L-8400 is the only modular base unit that should be plugged
into the Handset jack on the 6400 Series telephones. If other modular
base units are used, the Whisper Page announcement may be
overheard by the other person on the call.
To make an important announcement (such as an incoming call) to
someone at another extension busy on another call
1. Lift the handset and press
which the Whisper Page feature is administered
, then the dial pad key on which the Leave Word Calling
(while off-hook), then the dial pad key on which the
, then the dial pad key on which the
Feature
again, then the dial pad key on which
Feature
Feature
11
[confirmation tone]
[confirmation tone]
. Then press the dial pad key on