Operation; Turning The Transceiver On; Adjusting The Volume Level - Yaesu FT-70DR Operating Manual

Operation

Turning the Transceiver ON

1. Press and hold the Power ( Lock ) switch to
turn the transceiver ON.
● Turning the transceiver OFF
Press and hold the Power ( Lock ) switch again
to turn the transceiver OFF.
● Inputting the call sign
The first time the transceiver is turned ON af-
ter it is purchased; input your own call sign.
z Inputting characters
Input the callsign with the ten key or DIAL knob.
• Rotate the DIAL knob to select any of the 38
available characters:.
···  0 – 9  A
* The " - " and " / " may not be input for the first
callsign character.
• Press the keys repeatedly to toggle among the
four available characters associated with that
key. For example: pressing the [ 2 ] repeatedly
will toggle through A → B → C → 2 → A ···
z Moving the cursor and deleting the input characters:
[ BAND ] key‫׃‬
Moves the cursor to the right
[ MODE ] key‫׃‬
Moves the cursor to the left
[ GM ] key‫׃‬
Press and hold to erase all characters after the cursor
z Saving the inputted call sign:
Press the [ F ] key or the PTT switch
z The Call Sign ID can be changed using set mode item [ 64 MYCALL ] (
Up to 10 characters can be entered.
z Characters that may be inputted for the call sign are the numbers 0-9, letters "A – Z" in upper
case, the hyphen and the slash.

Adjusting the Volume Level

1. While pressing and holding the VOL knob, rotate the DIAL knob to adjust the volume
to a comfortable level.
14
*
Z  ( space )  -
–  /
*
 ···
FT-70DR/FT-70DE Operating Manual
37 ) .