Yaesu FT-70DR Operating Manual page 6

C4fm/fm 144/430mhz digital/analog transceiver
Hide thumbs Also See for FT-70DR:
Table of Contents

Advertisement

DIAL Knob (
• Rotate the DIAL Knob to change the frequency or select a memory channel.
• While pressing and holding the VOL Switch, rotate the DIAL knob to adjust the
audio volume level.
• Rotate the DIAL Knob to select the desired entry for set mode.
MODE/STATUS Indicator
Indicates the transmit/receive status, and the communication mode with the high
brightness LED.
Receiving
Transmitting
GM function
during opera-
tion
Speaker
Keypad
The functions of the keypad are described in detail on page 5.
MIC/SP jack*
• Connect a speaker microphone or earpiece microphone to this jack.
• Connect the optional Clone Cable ( CT-27 ) , to transfer saved data and function
settings to another FT-70DR/DE transceiver.
• Do not connect any microphone which is not specified by Yaesu.
A malfunction may can result.
• When an external microphone or cable is connected, the dust and splash protection does
not function.
DATA Terminal*
• When updating the firmware, connect to a PC using a USB cable.
* When a new firmware update for the FT-70DR/DE is available, download the
data from the YAESU website to update the FT-70DR/DE to the latest version.
* NOTE: the optional camera-equipped microphone ( MH-85A11U ) is not supported.
EXT DC IN Jack* (
• When charging the battery pack, connect the battery charger to this jack.
• Connect an external power supply adapter with a cigarette lighter plug ( SDD-13 )
or an external power cable ( E-DC-6 ) to this jack.
Strap Hole (
*: When the included antenna and battery pack are installed and the MIC/SP jack, DATA terminal,
and EXT DC IN jack are securely covered with rubber caps, the FT-70DR/DE meets the water-
proofing performance conforming to IP54.
4
15 )
Communication status
Analog FM mode
Digital C4FM mode
Digital Data
Receiving signals with unmatched DG-ID,
DP-ID, tone frequency or DCS code
Analog FM mode
Digital C4FM mode
The other station is within the com-
munication range
Transmitting GM confirmation signal
to the other station within the commu-
nication range
13 )
12 )
Left portion
Green
Red
FT-70DR/FT-70DE Operating Manual
Right portion
Green
Blue
White
Blink in blue
Red
Blue
Light Blue
Blue

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ft-70de

Table of Contents