Porsche 928 GTS 1994 Owner's Manual page 45

Selectable on-board-computer and
auxiliary functions
When the ignition is switched on, the follow-
ing appear:
Display, left: odometer reading
Display, centre: last on-board-computer
function selected
Display, right: tripmeter I reading
With the ignition on, the on-board-computer and
auxiliary functions below can be called up in turn
with the aid of the information-system control
lever. The letters, digits and symbols for all the
function displays are orange. Any messages
concerning faults occurring simultaneously in the
car will appear in red. Once the ignition is
switched off, the last function selected is dis-
played until the central locking system is acti-
vated, or for a period not longer than 4 minutes.
On-board-computer functions
Press the control lever forwards to enter the on-
board-computer selection mode.
The function selected appears in the centre dis-
play. Worded messages appear on the left and
right. Push the lever up to select the next func-
tion; pushing the lever down calls up the pre-
vious function. The worded messages are can-
celled when the lever is pulled, or automatically
after 4 minutes.
After this, the auxiliary functions reappear in the
left and right displays.
American measuring units will be changed into
metric units by pulling the lever twice within 1
second (this applies only for U.S. specified ve-
hicles).
Pull control lever for 3 seconds to reset.
Range calculated on the basis of fuel left in
tank, present consumption and average con-
sumption.
Reading between -40° and +140° F. (-40° and
+ 60° C). The outside temperature display is not
an ice warning!
Pull control lever for 3 seconds to reset.
45