Porsche 928 GTS 1994 Owner's Manual page 103

Additional headlights
3. Remove Phillips screws holding the lamp (ar- 5. Remove defective bulb and replace Be sure
rowed) and pull out the lens as a unit. guide pins on bulb base fit into socket of re
(fog lights, high beam)
flector.
4. Disconnect wire. Push down holding clamp
1. Remove cover of rubber buffer.
6
for bulb. - Reinstall lamp, tighten screws. Check
functioning and adjustment of light.
2. Remove Phillips screws from rubber buffer
and the transparent side cover with a screw-
7. Install rubber buffer and side cover and
driver.
tighten retaining screws.
104