Porsche 928 GTS 1994 Owner's Manual page 112

Towing eyes
A threaded towing eye is contained in the tool
kit. This is to be used only to pull the vehicle
onto the flat bed if the vehicle will roll freely.
Under no circumstances is the vehicle to be se-
cured using the towing eye. Damage to the ve-
hicle will result.
Screw the towing eye into the hole to the right
of the radiator. To do this remove the cap with
the aid of the Allen key.
Pulling vehicle onto flat bed
Position wooden ramps at the base of the flat
bed to reduce the angle of the pull. Reel in the
hoist cable and check the underside of the ve-
hicle for any interference.
Tieing down vehicle on flat bed
Carefully feed towing straps through the opening
in the rear wheels. Make sure metal parts of
straps do not damage rim. Make sure the strap
is flat over the rim bead. Make sure brake back-
ing plate is not damaged.
Secure straps to rear of flat bed. Reel in hoist
cable only far enough to tension tie-down straps.
Carefully feed towing straps through the opening
in front wheels. Make sure metal parts of straps
do not damage rim. Make sure the strap is flat
over the rim bead. Make sure brake backing
plate is not damaged.
Secure straps to front of flat bed. Release ten-
sion on hoist cable, but do not disconnect. Use
hoist cable as a safety cable.
113