Chapter 2 Installing Hardware; Installation Requirements; Attentions In Installation - Huawei IAD108A User Manual

User Manual
U-SYS IAD108 Integrated Access Device

Chapter 2 Installing Hardware

IAD108 consists of hardware system and software system.
Before running the equipment, you must install the hardware and
load the software.

2.1 Installation Requirements

2.1.1 Attentions in Installation

To avoid the damaged to equipment or the hurt to human body
caused by improper operation, you should pay attention to the items
listed in Table 2-1.
Table 2-1 Attentions in installation
Item
Do not put the equipment beside water or in damp place, in order to
1
prevent water and moisture from entering the equipment.
Do not put the equipment on precarious box or desk, in case it falls, it
2
will be seriously damaged.
Make sure that the working voltage is the same as the rated voltage,
3
because IAD108 can only work normally at proper voltage.
Never open the shell when the device is working. Do not open the shell,
4
even if it is powered off, unless absolutely necessary.
Before cleaning IAD108, pull out the power plug of the device. Wipe
5
IAD108 with dry cloths, and do not wash IAD108 with any liquid.
Chapter 2 Installing Hardware
Description
2-1