Transfer Corona Wire Replacement - Ricoh FT2260 Service Manual

1 August 1988

TRANSFER CORONA WIRE REPLACEMENT

6.2
Open the clamshell and remove both the lower rear cover and front cover.
1.
2.
Remove the transfer corona unit [A] (1 screw, 1 plug).
3. Gently remove the front endblock cover [B].
4.
Slide the rear endblock cover [C] to the rear and then remove it together
with the transfer corona wire [D] .
Remove the transfer corona wire from the tension spring [E].
5.
NOTE: Check the action of the tension spring after installation.
5-44