Astell & Kern PPE12 Instruction Book page 39

User Guide
Removing a Bluetooth Pairing
1. Press [ ] to the right of the pai
red device to be redirected to
the settings screen.
2. Select [Remove Pairing] to
complete the process.
Bluetooth Support Specifications
Profile: A2DP
Device performance may be affected during Hi-Fi playback.
(48 kHz or lower is recommended.)
DSD playback is unavailable via Bluetooth.
Do not turn off the device while connected to Bluetooth. P
ower cycle the Bluetooth device in case of malfunction.
Pairing methods may differ for each individual Bluetooth device.
Always refer to the respective instruction manual for details.
When connecting the product to a Bluetooth device, the distanc
e between the two must be within 20 cm.
Audio quality will degrade with longer distances, and the pairing
may disconnect at a distance of 2 m (6.5 ft) or more. (Distances
may vary depending on device and environment.)
Crosstalk may be heard while using Bluetooth.
For multipoint devices, make the necessary connections prior to
use.
Car audio Bluetooth connections are not supported. Malfunction
, noise, and other undesirable effects may occur due to the devic
e's battery level and the environment.
If signal interference affects data transmission. (e.g. holding
the device while wearing a Bluetooth device, holding the devi
ce while holding another electronic device, etc.)
If the device or Bluetooth headset's radio transmitters are
touching parts of the body.
If the transmission strength is affected by walls, corners,
partitions, etc.
If devices using the same frequencies cause interference. (e.g.
medical devices, microwave ovens, Wi-Fi, etc.)
Areas with an excessive amount of interference or weak
signals. (e.g. elevators, underground, etc.)
Using the Device
38