Table of Contents
Advertisement
11) CI (Chassis Intrusion Header)
This motherboard provides a chassis detection feature that detects if the chassis cover has been removed.
This function requires a chassis with chassis intrusion detection design.
1
12) MON_SW (Flat Panel Display Switch Header)
This header allows you to connect an on/off switch for the display.
1
13) LCD_VCC (LVDS Drive Voltage Jumper)
This jumper can be used to provide different screen voltage settings.
1-2 Close: Set to 3V. (Default setting)
1
2-3 Close: Set to 5V.
1
14) G PIO_SET (GPIO Status Configuration Jumper)
Use this jumper to set the GPIO status of the LPT_GPIO header to HIGH or LOW.
1-2 Close: Set to HIGH level (3V) (Default)
1
2-3 Close: Set to LOW level.
1
Pin No. Definition
1
Signal
2
GND
Pin No. Definition
1
Mon_SW
2
GND
- 14 -
Advertisement
Table of Contents
