Mazda CX-3 2018 Owner's Manual page 454

Maintenance and Care
Owner Maintenance
3. Disconnect the bulb from the socket.
4. Install the new bulb in the reverse
order of the removal procedure.
Front turn signal lights
1. Make sure the ignition is switched off,
and the headlight switch is off.
2. Turn the screw counterclockwise and
remove it, and then partially peel back
the mudguard.
3. Turn the socket and bulb assembly
counterclockwise and remove it.
6-46
*Some models.
CX-3_8GA5-EA-17F_Edition1
4. Disconnect the bulb from the socket.
5. Install the new bulb in the reverse
order of the removal procedure.
*
Fog lights , Side turn signal lights
Brake lights/Taillights (With LED
headlights), Rear side-marker lights
(With LED headlights),Taillights (With
LED headlights), High-mount brake
light
The LED bulb cannot be replaced as a
single unit because it is an integrated unit.
The LED bulb has to be replaced with the
unit. We recommend an Authorized
Mazda Dealer when the replacement is
necessary.
Rear turn signal lights, Brake lights/
Taillights (With halogen headlights),
Rear side-marker lights (With halogen
headlights)
1. Make sure the ignition is switched off,
and the headlight switch is off.
*
,
2017-4-7 15:30:54