When Driving
i-ACTIVSENSE
CAUTION
In the following cases, turn the system off to prevent a mis-operation:
The vehicle is being towed or when towing another vehicle.
The vehicle is on a chassis roller.
When driving on rough roads such as in areas of dense grass or off-road.
Refer to Stopping the Smart City Brake Support (SCBS) system Operation on page 4-107 on
how to turn off the SCBS system.
NOTE
The SCBS system will operate under the following conditions.
•
The engine is running.
•
The Smart Brake Support/Smart City Brake Support (SBS/SCBS) system warning light
•
(amber) does not illuminate.
(Rear-end collision warning)
•
The vehicle speed is about 4 to 80 km/h (2 to 50 mph).
(Brake control (Smart City Brake Support (SCBS) brake))
•
The vehicle speed is about 4 to 30 km/h (2 to 18 mph).
The SCBS system is not turned off.
•
Under the following conditions, the SCBS system may not operate normally:
•
The SCBS system will not operate if the driver is deliberately performing driving
•
operations (accelerator pedal and steering wheel).
If there is the possibility of partial contact with a vehicle ahead.
•
The vehicle is driven on a slippery road surface such as wet roads or icy or snow-bound
•
roads.
The braking performance is adversely affected due to cold temperatures or wet brakes.
•
The vehicle is driven at the same speed as the vehicle ahead.
•
The accelerator pedal is depressed.
•
The brake pedal is depressed.
•
The steering wheel is being operated.
•
The selector lever is being operated.
•
In the following cases, the Forward Sensing Camera (FSC) determines that there is a
•
vehicle ahead and the SCBS may operate.
Objects on the road at the entrance to a curve.
•
Vehicles passing in the opposite lane while making a curve.
•
Metal objects, bumps, or protruding objects on the road.
•
When passing through a toll gate.
•
When passing through low gates, narrow gates, car washing machines, or tunnels.
•
4-106
CX-3_8GA5-EA-17F_Edition1
2017-4-7 15:30:54