Mazda CX-3 2018 Owner's Manual page 313

If a general mobile phone device is USB
•
connected during music playback over
®
the Bluetooth connection, the
®
Bluetooth connection is disconnected.
For this reason, you cannot have music
playback over a Bluetooth
and music playback using a USB
connection at the same time.
The system may not operate normally
•
depending on the Bluetooth
device.
▼ Switching to Bluetooth
To listen to music or voice audio recorded
®
to a Bluetooth audio device, switch to the
®
Bluetooth audio mode to operate the
audio device using the audio system
control panel. Any Bluetooth
device must be paired to the vehicle's
®
Bluetooth unit before it can be used.
®
Refer to Bluetooth
on page 5-38.
1. Turn on the Bluetooth
power.
2. Switch the ignition to ACC or ON.
Make sure that the " " symbol is
displayed in the audio display. The
symbol is not displayed if an un-paired
®
Bluetooth audio device is being used
or the vehicle's Bluetooth
malfunction.
NOTE
®
Some Bluetooth
certain amount of time before the " "
symbol is displayed.
3. Press the media button (
switch to the Bluetooth
and start playback.
CX-3_8GA5-EA-17F_Edition1
Audio Set [Type A (non-touchscreen)]
®
connection
®
audio
®
audio mode
®
audio
Preparation (Type A)
®
audio device's
®
unit has a
audio devices need a
) to
®
audio mode
If the current device version is lower
than AVRCP Ver. 1.3: "BT Audio" is
displayed.
If the current device is AVRCP Ver. 1.3:
The playback time is displayed.
NOTE
®
If the Bluetooth audio device does not
•
begin playback, press the Play/Pause
button (4).
If a call is received on a hands-free
•
mobile phone during playback from the
®
Bluetooth audio device, the playback is
stopped. Playback from the Bluetooth
audio device resumes after the call ends.
▼ Playback
1. To listen to a Bluetooth
over the vehicle's speaker system,
switch the mode to Bluetooth
mode. (Refer to "Switching to
®
Bluetooth audio mode")
2. To stop playback, press the Play/Pause
button (4).
3. Press the button again to resume
playback.
Selecting a file (track)
Selects the next file (track)
Short-press the track up button (
Selects the beginning of the current file
(track)
Short-press the track down button (
Fast-forward/Reverse (AVRCP Ver. 1.3)
Fast-forward
Press and hold the fast-forward button
( ).
Interior Features
®
®
audio device
®
audio
).
).
5-51
2017-4-7 15:30:54