Mazda CX-3 2018 Owner's Manual page 305

Display Mode
Device infor-
DEVICE
mation dis-
INFO
play mode
3. Press the audio control dial to
determine the mode.
▼ Bluetooth ®
audio device pairing
®
(Bluetooth Audio)
®
Any Bluetooth audio device must be
paired to the vehicle's Bluetooth
before it can be listened to over the
vehicle's speakers.
A maximum of seven devices including
®
Bluetooth audio devices and hands-free
mobile phones can be paired to one
vehicle.
NOTE
®
If a Bluetooth device has already been
•
paired to the vehicle as a hands-free
mobile phone, it does not need to be
paired again when using the device as a
®
Bluetooth audio device. Conversely, it
does not need to be paired again as a
hands-free mobile phone if it has
already been paired as a Bluetooth
audio device.
Device registration can also be done
•
using voice recognition.
Concerning the operation of a Bluetooth
audio device itself, refer to its instruction
manual.
®
Some Bluetooth audio devices have PIN
codes (four digits). Refer to the audio
device's instruction manual because the
pairing procedure differs depending on
whether it has a PIN code or not.
CX-3_8GA5-EA-17F_Edition1
Audio Set [Type A (non-touchscreen)]
Function
Displaying vehicle's
®
Bluetooth unit infor-
mation
®
unit
®
®
®
Pairing a Bluetooth
which has a four-digit PIN code
1. Using the audio control dial, select the
pairing mode "PAIR DEVICE" in the
"BT SETUP" mode. (Refer to
®
"Bluetooth audio device set-up" for
details.)
2. Press the audio control dial to
determine the mode. After "ENTER
PIN" is displayed on the audio display
for three seconds, "PIN 0000" is
displayed and the PIN code can be
input.
3. Input the PIN code of your Bluetooth
audio device by pressing channel
preset buttons 1 to 4 while "PIN 0000"
is displayed.
Press channel preset button 1 to input
the first digit, 2 for the second, 3 for
the third, and 4 for the forth. For
example, if the PIN code were "4213"
press channel preset button 1 four
times (1, 2, 3, 4), button 2 twice (1, 2),
button 3 once (1), and button 4 three
times (1, 2, 3). If the "PIN 0000"
display disappears before finishing the
PIN code input, repeat the procedure
from Step 1.
NOTE
Some devices accept only a particular
pairing code (Usually, "0000" or
"1234").
If pairing cannot be completed, refer to
the owner's manual of your mobile
device, and try those numbers if
necessary.
4. Press the audio control dial while the
input PIN code is displayed.
"PAIRING" flashes on the audio
display.
Interior Features
audio device
®
5-43
2017-4-7 15:30:54