Mazda CX-3 2018 Owner's Manual page 221

During headway control travel, the system accelerates and decelerates your vehicle in
•
conjunction with the speed of the vehicle ahead. However, if it is necessary to accelerate
for a lane change or if the vehicle ahead brakes suddenly causing you to close in on the
vehicle rapidly, accelerate using the accelerator pedal or decelerate using the brake
pedal depending on the conditions.
While the MRCC system is in use, it does not cancel even if the selector lever (automatic
•
transaxle)/shift lever (manual transaxle) is operated and any intended engine braking will
not occur. If deceleration is required, lower the vehicle speed setting or depress the brake
pedal.
The brake lights are illuminated while the MRCC automatic braking is operating.
•
The MRCC warning light (amber) illuminates when the system has a malfunction.
•
Refer to Warning Lights on page 4-22.
The headway control operation can be canceled and the system can be switched to only
•
cruise control.
Refer to Cruise Control Function on page 4-102.
▼ Mazda Radar Cruise Control (MRCC) Display Indication
The setting status and operation conditions of the Mazda Radar Cruise Control (MRCC)
system are indicated in the active driving display.
▼ Close Proximity Warning
If your vehicle rapidly closes in on the vehicle ahead because the vehicle applies the brakes
suddenly while you are traveling in headway control, the warning sound activates and the
brake warning is indicated in the display. Always verify the safety of the surrounding area
and depress the brake pedal while keeping a safer distance from the vehicle ahead.
Additionally, always keep a safer distance from the vehicles behind you.
CX-3_8GA5-EA-17F_Edition1
Vehicle ahead display
When Driving
i-ACTIVSENSE
MRCC Distance
between vehicle
display
MRCC Set vehicle speed
4-97
2017-4-7 15:30:54