Table of Contents
Advertisement
Chapter 2 Preparations
4.
Mount the support bracket for Internal Flash Memory.
Align the positioning key with the groove, and secure it with two screws. (Two types of screws are
provided. Use the flat head screw for Internal Flash Memory, and the pan head screw for center side
of chassis.)
5.
Install the component you have removed in earlier steps.
6.
Install the CPU blade having been removed to the Blade Enclosure according to the User's Guide of
the Blade Enclosure.
7.
Turn on the power of the CPU blade. Make sure that no error message appears in POST.
If any error messages are displayed, refer to Chapter 3 (1. POST Error Message) in "Maintenance
Guide".
1.10.3 Removal
To remove the Internal Flash Memory, remove the top cover according to Chapter 2 (1.3.1 Removal of top
cover), and then perform steps 2 and 3 of Chapter 2 (1.10.2 Installation) in reverse order.
74
Express5800/B120e-h User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
