Table of Contents
Advertisement
Chapter 2 Preparations
1.3.2 Removal of air duct
Take steps below to remove air duct.
1. Remove the two screws from the front frame that secures the air duct.
2. Pull the front frame toward the front of CPU blade, and remove it.
3. Remove the three SSD cable connectors.
This step is not required if the N8403-042F diskless kit has been installed. Proceed to Step 4.
42
Important
Pay attention to orientation of guide key on SSD cable connector.
Express5800/B120e-h User's Guide
1. Installing Internal Optional Devices
Advertisement
Table of Contents
