Chapter 3 Setup - NEC Express5800/B120e-h User Manual

NEC Express5800 Series
Express5800/B120e-h
This chapter describes how to set up the CPU blade.
1. Turning on the Server
POST (Power-On Self-Test) is explained in this section.
2. System BIOS (Setup)
You can customize the BIOS settings by following the instructions in this section.
3. EXPRESSSCOPE Engine 3
EXPRESSSCOPE Engine 3 provides useful features through the Baseboard Management Controller
(BMC).
4. EXPRESSBUILDER
EXPRESSBUILDER helps you to install Windows and maintain the server.
5. Installing Software Components
You can install Windows and bundled software by following the instructions in "Installation Guide
(Windows)".
6. Device Identification
Describes ID lamp provided in the server.
7. Power-off of Blade Server
Turn off power when not using the server.
Express5800/B120e-h User's Guide
Setup
83