Overview Of Installation And Removal - NEC Express5800/GT110e EXP280A User Manual
Hide thumbs
Also See for Express5800/GT110e EXP280A:
- Specifications (2 pages) ,
- Configuration manual (29 pages)
Table of Contents
Advertisement
Chapter 2 Preparations
1.3
Overview of Installation and Removal
Install/remove components by using the following procedure.
•
If the server is ON, turn it off.
Refer to Chapter 3 (6. Turning Off the Server).
•
Disconnect the power cord from the outlet and the server.
•
Disconnect all cables connected to the connector at the rear.
•
Remove the side cover.
Refer to Chapter 2 (1.4. Removing the Side Cover).
•
Remove the front bezel.
Refer to Chapter 2 (1.5 Removing the Front Bezel).
•
Depending on the components to be installed or removed, follow the procedure in order.
Refer to Chapter 2 (1.6 Internal Flash Memory) to (1.14 File devices).
•
Connect cables.
Refer to Chapter 2 (1.15 Connecting cables).
•
Attach the front bezel.
Refer to Chapter 2 (1.16 Attaching the Front Bezel).
•
Attach the side cover.
Refer to Chapter 2 (1.17 Installing the Side Cover).
This is the end of the installation or removal procedures for internal optional devices.
Continue the setup with reference to Chapter 2 (2.2 Connection).
Express5800/GT110e User's Guide
1. Installing Internal Optional Devices
43
Advertisement
Table of Contents
