Panasonic SP22P Operating Instructions Manual page 85

153C-007P
153C-006P
To the next page
If the paper is not taken up properly because the paper tube fit to the flanges
on the take-up side races, stop using that paper tube and use the accompany-
ing aluminum tube.
193C-E-OMA06-A01-01
153C-006P
Move the paper tube untill it
separates from this projection.
NOTICE
Supplying Cleaning Paper
4.
Remove the paper tubes of paper roll.
1 Move the paper tube of paper roll to the right.
2 After making sure the flange separates from
the projection at the left side, remove the paper
tube. (Remove both the paper tubes on the
take-up side and the supply side.)
∗ Do not dispose of the paper tube on the supply
side because it will be used as the paper tube
on the take-up side later.
5.
Fit the flanges to a new paper roll and
fit it on the supply side (lower side).
6.
Fit the flanges to the paper tube re-
moved at the step 4) and fit it on the
take-up side (upper side).
7.
Remove the cover of solvent nozzle
part.
∗ Remove the two screws, then remove the
cover.
6
Page 6-13