Table of Contents
Advertisement
6.6
Notes about new installation of Windows 2000
6.6
Service pack
After a new installation of Windows 2000, install at least Service Pack 4. Service Pack 4 is
supplied in the product package.
Note
If you are using SIMATIC WinCC or SIMATIC WinCC flexible, pay heed to the operating
system releases. For additional information, refer to the SIMATIC WinCC and SIMATIC
WinCC flexible documentation.
Automatic updates
The "Automatic updates" function is installed with Service Pack 3 or later for Windows 2000.
Call
Start menu "Start", command "Settings > Control panel > Automatic Updates"
You can deactivate this function in the dialog "Automatic Updates" "Keep my computer up to
date". With this setting enabled, ....
Updates will then no longer be performed automatically on the device via the Internet.
Notice
When the check-box is activated, updates will be installed automatically on the device via the
Internet even when they have not been released by Siemens AG.
SIMATIC Panel PC 577
Operating Instructions, Release 04/2006, A5E00798484-01
6.6 Notes about new installation of Windows 2000
Commissioning
6-13
Advertisement
Table of Contents
