Yamaha Genos Reference Manual page 118

1
Select the desired EQ type to be edited.
• Flat: Flat EQ settings. The gain of each frequency is set to 0dB.
• Mellow: Soft and mellow EQ settings in which high-frequency bands are reduced slightly.
• Bright: EQ setting for boosting the level of the high frequencies, making the sound brighter.
• Loudness: Clear EQ settings in which both the low- and high-frequency sounds are emphasized. This is a good
match with up-tempo music.
• Powerful: Powerful EQ settings in which all frequency sounds are emphasized. This can be used to boost the
music for parties, etc.
• User1/2: Your own custom EQ settings saved in step 4.
2
Adjust the Q (bandwidth) and the Center Frequency of each band.
The available Frequency range is different for each band. The higher the value of Q, the narrower the bandwidth.
3
Adjust the Gain level to boost or cut each of the eight bands as desired.
4
Touch (Save) to save the settings as a User Master EQ type.
Up to two EQ types can be created and saved.
118
Genos Reference Manual
1
4
2
3
NOTICE
The settings will be lost if you
turn the power to the instrument
off without carrying out the Save
operation.
NOTE
If you want to save the Master EQ set-
tings to the USB flash drive, save as a
User Effect file. To do this, from the dis-
play called up via [MENU]  [Utility]
 [Factory Reset/Backup]  page 2/2,
touch [Save] of "User Effect" to carry
out the Save operation (page 148).