Yamaha Genos Reference Manual page 93

3
Specify the Start/End points.
3-1
Adjust the playback position to the desired Start point.
To adjust the playback position, touch [
[DEC]/[INC] buttons.
To adjust the point while listening to the playback of around the point, use the Nudge function. For details,
see "Using the Nudge Function" below.
3-2
Touch [Set] corresponding to "Start" to specify the Start point.
3-3
Adjust the playback position to the desired End point.
Execute the same operations as Step 3-1.
3-4
Touch [Set] corresponding to "End" to specify the End point.
The Start/End points are specified on the display, but they are not yet actually entered to the file.
4
Touch [Audition] to check the specified playback range.
The audio file is played back in the specified range, and you can check the range by listening.
To discard the specified Start/End points and exit the operation display, touch [Cancel]. To change the specified
points, execute from the Step 3 again.
5
Touch [OK] to actually set the Start/End points to the file.
Now the Start/End points are actually entered, and are saved to the Multi Track Audio file.
Using the Nudge Function—Adjusting the Position while Listening to Playback
By using the Nudge function, you can listen to the playback around the position while moving the playback position
slightly (even in millisecond units).
To use the Nudge function, touch
: Loop playback of the range beginning 500 milliseconds before and up to the current playback position.
: Loop playback of the range beginning at the current playback position and up to 500 milliseconds after.
To adjust the playback position while using the Nudge function, touch [
or press the [DEC]/[INC] buttons.
To turn off the Nudge function, touch

>/o << >>
]/[ ]/[ ]/[
or to turn it on.
or so that both items are turned off.
] on the display, use the Data dial, or press the
<< >>
]]/[ ] on the display, use the Data dial,
Genos Reference Manual
6
93