Chapter 2 Installation
2.3 Installing in a Rack
2.3.2
Installing an AC Sensor Unit
This section describes how to install an AC sensor unit in a rack.
Install the AC sensor unit in the same rack as the server UPS unit. When installing the AC sensor unit, the
length of the power cord (for AC sensor) that connects the AC sensor unit and the server UPS unit must be
taken into consideration.
■
Checking the package contents of the rack mount kit
Check the following package contents to confirm that there are no missing parts. If there are missing parts,
contact your sales representative.
❏ Shelf plate: 1
❏ M4 cross recessed head screw
with captive washer: 2
❏ M6 cross recessed head screw
with captive washer: 4
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide (Power Synchronized Unit)
❏ M3 cross recessed head screw
with captive washer: 4
❏ Blank panel: 1
39
Copyright 2017 FUJITSU LIMITED
❏ L-shaped bracket: 2
Same for right and left.
❏ M6 cage nut: 4
Used when the holes in the
rack pillars are square
P3AM-8012-10ENZ0