Planet NVR-3210 User Manual page 70

* Once motion detection is enabled on this page, please configure the
motion area and enable motion detection in the corresponding channels
(cameras) from camera's own web UI. The NVR only detects the first motion
area set in the camera. The NVR recognizes the first motion area by its ID
number set in the camera.
* Enabling the "From CMS software" option allows the NVR to receive
events from the CMS software and start recording; events such as the
intelligent video detection in the CMS.
You can set up the recorder to receive triggers from a particular camera's digital input.
1. For cameras that come with physical digital input ports, their ports will be listed in the far left
drop-down menu.
2. Pick the desired channel and then select the camera's input port from the drop-down menu.
3. Select the trigger condition from the "Port condition" drop-down menu.
*The recorder only acts as a medium for pairing up input/output ports between cameras and
the recorder.
*Only connected cameras will be displayed in the list.
*Some cameras only allow one trigger source to be configured at a time, e.g.,
if the camera has the motion detection function turned on, its digital input will be disabled and
vice versa. Under such circumstance, if you set to use camera's digital input port as the event
trigger source, you will not be able to select motion detection as the trigger source for this
camera
Click the "Advance" button to set up event schedule.
The "recording buffer" allows user to define "pre-alarm" and "post- alarm" time for event
recordings. The "pre-alarm" time sets the NVR to record in advance when an event is triggered.
The "post-alarm" time sets the NVR to continue recording for a period of time after an event
trigger is finished.
32-Channel Network Video Recorder
NVR-3210/NVR-3250/NVR-3280
70