Network Settings - Planet NVR-3210 User Manual

7.1.1 Network Settings

The NVR supports three connection types that can be configured (depending on how the
network is set up):
Set network automatically
Set the NVR to configure network settings automatically
1) When no other DHCP server is in the network, the NVR should use the default IP:
192.168.0.20 and turn on built-in DHCP servers
2) Users should not be able to change IP settings when this mode is selected
3) Users cannot turn on/off built-in DHCP server
Get network configuration automatically
This sets the NVR as a DHCP client
1) If no other DHCP server is in the network, the NVR should change to use the auto mode
automatically
2) Users should not be able to change IP settings when this mode is selected
3) Users cannot turn on/off built-in DHCP server
32-Channel Network Video Recorder
NVR-3210/NVR-3250/NVR-3280
49