Getting Started - Fishman Loudbox Mini Charge User Manual

Getting Started

Your new Loudbox Mini Charge is a portable, battery-powered amplifi er de-
signed to faithfully reproduce the sound of acoustic instruments and a diverse
assortment of vocal or recorded accompaniments.
With the addition of Bluetooth
neatly add backing tracks or other accompaniment to your performances, jams,
or wherever your Loudbox Mini Charge takes you and your music. Where Are
You Going to Take It? ™
Here are some basic setup tips to help get you going. To operate your Loud-
box Mini Charge safely, please read the entire manual, especially the Important
Safety Instructions on page 2.
1. Locate the Power switch (next to the rear panel power cord socket) and switch
it off, then connect the provided AC adapter into the back of the amplifi er and
the provided line cord into the AC adapter.
2. Plug the Loudbox Mini Charge line cord into an electrical outlet with the ap-
propriate AC voltage, 100-240VAC 50/60 Hz.
3. Turn down the Master Volume control and turn on the Power switch. The
Power Indicator should illuminate. Either the Battery Indicator will illuminate
if the battery is fully charged or the Low Battery Indicator will illuminate if the
battery needs charging.
4. Connect your instrument to the Instrument input with a shielded ¼" cable.
5. Gradually increase the Instrument channel Gain:
• For instruments featuring active (battery-powered) onboard preamps,
start with the control around 10 o'clock.
• For passive pickups, you may start with the control set much higher.
It is normal to run this control near its maximum with many passive
soundhole pickups.
6. Slowly raise the Master Volume to the desired level.
Instrument Gain Low
Phase
wireless connectivity, you can now easily and
®
Mid High Reverb Chorus
mild
off
Gain
heavy
Mic
5
pairing
Low Reverb Master
High
battery
low battery
charging
power