Powering Off The Display; Switching On And Off At The Breaker - Raymarine AXIOM Advanced Operation Instructions

Powering off the display

1. Swipe your finger from left to right across the Power button swipe area.
The Shortcuts menu is displayed.
2. Press and hold the Power symbol until the screen switches off.
Note: When powered off, the unit may still draw a small amount of power from the battery, if this is
a concern unplug the power supply or switch off at the breaker.

Switching on and off at the breaker

If you wish to ensure that the MFD is not consuming any power then it must be switched off at the
breaker or have the power cable unplugged.
When the breaker is switched back on, or the cable is reconnected, the MFD will resume in the same
power state that it was in when it was switched off.
Set up
17