Raymarine AXIOM Advanced Operation Instructions page 105

Settings
Dual channel ping
mode
Tune frequency
AHRS stabilization
Interference
rejection
2nd echo rejection
Reset sounder
Reset trip
Page settings tab
Settings
Data Overlays
Edit split ratio
Sonar app
Description
On sonar modules that offer simultaneous dual
channel operation, such as the CP570, The ping
mode can be changed.
Auto the Sonar app will select the best mode
chosen based on range settings.
Independent pings maximizes ping rate but may
introduce interference.
Simultaneous pings reduced ping rate and
reduces chance of interference.
Enables manual tuning of non-CHIRP frequency
channels.
The AHRS built in to the RealVision™ 3D
transducer is used to stabilize the sonar image
onscreen based on your vessel's detected
movements.
Removes interference caused by other
transducers on your vessel or from vessels
equipped with transducers close by.
The control helps to remove false target returns
or false bottom that can be caused by signal
reflection.
Resets the sonar module to factory default
settings.
In installations that include a speed transducer
connected via the sonar module a trip log is
automatically recorded. Selection this option will
reset the sonar modules trip log.
Description
Enables configuration of Data overlays
Enables you to customize the position of the partitions in
splitscreen app pages.
Options
• Auto
• Independent pings
• Simultaneous pings
• -50% to +50%
• On
• Off
• Auto
• Low
• Medium
• High
• Off
• Off
• Low
• High
• Yes
• No
• Yes
• No
105