Do NOT connect or disconnect Note: New a Series, New c Series and New e Series equipment with the power switched on, The RMK-9 is a remote control keypad for Raymarine displays cannot be powered on using the keypad. unless instructed in this document.
• Raymarine equipment and cables connected to it are: – At least 1 m (3 ft) from any equipment transmitting Warranty registration or cables carrying radio signals e.g.
6. Documentation pack. Flush mounting the keypad Note: The appropriate tightening torque and drill bit size to use depends on the thickness of the mounting For flush mounting you must rebate the mounting 7. Right angled power cable 2 m (6.6 ft.). surface and the type of material it is made from.
8. Place the supplied gasket onto the rear of the 3. Close the opposite end of the keypad mat into the 4. With all 3 tabs along one side of the keypad free keypad, ensuring the mounting holes are aligned. keypad ensuring that the end tab and all side tabs the keypad mat should easily come away from the (shown below) click firmly into place.
Page 7
• Negative grounded, with the negative battery terminal 1. gS Series multifunction display (supplying PoE to connected to the vessel's ground. Direct connection — Raymarine multifunction the keypad). display • Floating, with neither battery terminal connected to 2.
Keypad controls Network connection — Raymarine multifunction Configura- Display Momentary Press and displays tion State press hold Connecting the keypad allows you to control your multifunction display remotely. — Power on* Multifunction display Open Power down shortcuts page — Multiple...
Technical specification Raymarine provides a comprehensive customer support service. You can contact customer support through the Power specification Raymarine website, telephone and e-mail. If you are unable to resolve a problem, please use any of these PoE class Class 1 facilities to obtain additional help.
Page 10
Wired connections RayNet to RJ45 SeaTalk adapter cables Network / power 1 x RayNet connector Cable Part number • gS Series — 1000 Mb/s plus PoE. 1 m (3.28 ft) RayNet to RJ45 A62360 SeaTalk cable • a, c, e Series — 100 Mb/s. 3 m (9.84 ft) RayNet to RJ45 A80151 Alternate power...