Pride Mobility 805KD Owner's Manual page 19

V. OPERATION
Follow these steps to operate the heat function (Fig. 5.3):
1. Press the HEAT button once to activate the heat function. The heat function will shut off automatically
after 20 minutes of continuous use.
2. Press the HEAT button again to turn off the heat function.
Follow these steps to operate the massage option (Fig. 5.3):
1. Press the MASSAGE button once to activate the massage function. This will automatically set the mas-
sage to the wave setting.
2. Press the MASSAGE button again to go to the next of three available massage settings: wave, steady, or
pulse. Each press of the button will take you to the next setting. Each setting is indicated by a coloured LED.
3. Press and hold the MASSAGE button for approximately 2 seconds to shut off the massage function,
otherwise this function will shut off automatically after 20 minutes of continuous use.
Follow these steps to adjust the intensity of the massage function (Fig. 5.3):
1. Press the INTENSITY button once to set the massage option to low.
2. Press the INTENSITY button again to set the massage option to the next of three available settings: low,
medium, or high. Each press of the button will take you to the next setting. Each setting is indicated by a
coloured LED.
NOTE: All heat units are designed with an auto-shutoff mechanism that turns off the heat after
20 minutes of use. Pride recommends that the heat and massage units not be used for more than
20 minutes at a time. However, you should consult your physician about how often you should
use the heat and massage options on your lift chair.
Lift Chair Series www.pridemobility.com
LIFT CHAIR SERIES
19