Pride Mobility 805KD Owner's Manual page 13

IV. ASSEMBLY/DISASSEMBLY
4.1.3 Push firmly on the top of the chair-back to
lock into position. Listen for a click on each
side to ensure the chair-back is locked in
properly.
NOTE: Pull up on the chair-back to ensure that
it is locked in place. If the back can be pulled
off, then repeat steps 4.1.1 and 4.1.3. You
must hear a click from each side of the chair.
HEAT CONNECTION
TO JUNCTION BOX
MASSAGE
UNIT
JUNCTION
BOX
4.1.5 For units equipped with heat and/or massage
options, connect the heat and/or massage
harnesses to the junction box mounted to the
back of the lift chair. There will be one heat
connection and two massage connections.
Lift Chair Series
"CLICK"
4.1.4
MASSAGE UNIT
4.1.6
www.pridemobility.com
Connect the hand control harness to the
motor. For units equipped with heat and/or
massage, connect the hand control harness
directly to the junction box mounted to the
back of the lift chair.
Attach the chair-back to the hook and loop
flaps on the bottom of the chair base.
LIFT CHAIR SERIES
13