Pride Mobility 805KD Owner's Manual page 18

LIFT CHAIR SERIES
1. Slide the inhibit switch to the left.
2. Engage and hold the up/down switch in the DOWN position until the footrest is fully elevated.
3. Slide the inhibit switch to the right.
4. Engage and hold the up/down switch in the DOWN position until the seatback is fully reclined.
5. Engage and hold the up/down switch in the UP position to return to an upright, seated position. Release
the switch when the lift chair reaches a comfortable seated position.
6. Slide the inhibit switch to the left.
7. Engage and hold the up/down switch in the UP position to lower the footrest.
Follow these steps to recline your LL770 Lift Chair to the "zero gravity" position from the seated
position (Fig. 5.2):
NOTE: The "zero gravity" position is designed to disperse body weight evenly across the chair
while raising the user's legs above the torso.
1. Slide the inhibit switch to the left.
2. Engage and hold the up/down switch in the DOWN position until the footrest is fully elevated.
3. Slide the inhibit switch to the right.
4. Engage and hold the up/down switch in the DOWN position to recline the seatback until your body
reaches a "V-like" position with your legs elevated higher from the ground than your torso.
5. Engage and hold the up/down switch in the UP position to return to an upright, seated position. Release
the switch when the lift chair reaches a comfortable seated position.
6. Slide the inhibit switch to the left.
7. Engage and hold the up/down switch in the UP position to lower the footrest.
Heat and Massage Hand Control Operation
Follow these steps to sit in your lift chair (Fig. 5.3):
1. Press and hold the UP button to raise your lift chair to the
standing position.
2. Back into the lift chair and sit in the centre of the seat,
using the armrests for support if needed.
3. Press and hold the DOWN button to lower the lift chair to
a comfortable seated position.
Follow these steps to recline your lift chair from the
seated position (Fig. 5.3):
1. Press and hold the DOWN button until comfortably
reclined.
2. Press and hold the UP button to return to an upright,
seated position. Release the button when the lift chair
reaches a comfortable seated position.
Follow these steps to stand up from your lift chair (Fig. 5.3):
1. Press and hold the UP button to raise your lift chair.
2. Release the button when the lift chair reaches a height
where you can stand up comfortably.
Follow these steps to activate/deactivate the lock feature (Fig. 5.3):
1. Press and hold the LOCK button for approximately 3 seconds to lock the hand control. The red LED to
the right of the button will light up to indicate the hand control has been locked.
2. Press and hold the LOCK button for approximately 6 seconds to unlock the hand control. The green LED
to the left of the button will light up to indicate the hand control has been unlocked.
18
HEAT BUTTON
UP BUTTON
UNLOCK
LED
MASSAGE
SETTING
LEDS
MASSAGE
BUTTON
Figure 5.3 Heat and Massage Hand
Control
www.pridemobility.com
V. OPERATION
LOCK/UNLOCK
BUTTON
LOCK LED
DOWN BUTTON
INTENSITY
SETTING
LEDS
INTENSITY
BUTTON
Lift Chair Series